Pipeline Group has a wide range of high pressure water jetters. From vehicle mounted small bore applications to trailer mounted units right up to large truck mounted units capable of jetting any demanding application, ideal for any size municipality, water and sewer district, or to clean stormwater drains, catch basins and/or sewers. All our jetters are fully equipped with a wide assortment of nozzles, saws and attachments to get through the toughest situations.

SPITWATER WATER JET

Pipeline Group use the Spitwater high pressure water jet for blocked drains in domestic and small bore applications.This unit runs at 3000psi and pumps approximately 20 litres a second. The end result…cleared drain, clean drain, happy client.

AQUATECH B10

The Aquatech B10, is the grandfather of high pressure water jetting.

This state of the art piece of equipment is designed for larger diameter applications and boasts hydro excavation and vacuum loading facilities.

Key performance characteristics:
340HP Volvo truck with Omsi split shaft PTO (truck and jetvac by powered by truck engine)

Vacuum Unit specification:

• Capable of producing 6120m3/hr suction. 3600 cfm
• Lift a 5.3m column of water through a 200mm hose.
• Suction hose is remotely operated on an extendable overhead boom, capable of 360 degree rotation.
• 7500 liter tipping debris tank with a fully opening rear door.
• Water pump off facility, capable of disposing 330 liter/minute as recycling to jetter storage tank or waste.
• Water in debris tank can be displaced while unit is performing suction operation.
• Unit is fitted with cyclone filters permitting wet and dry suction tasks.
• No destructive digging (hydro excavation)

Jetting unit specification:

• 330 liter/minute @ 13800 kPa. 80 gpm us 2000 psi
• 240m of 25mm jetting hose mounted on an articulated reel.
• Jetter storage tank 4000 liters with the ability to use the 7500 liter debris tanks as additional storage.
• Complete assortment of jetting nozzles and hand lances.